南宁棋牌

EOC-0102x-E Series
EOC-0102x-E Series

High-speed&long-distance transmission/LED Indications    

EOC-0102x-E Series    

 High-speed up to 224Mbps communications link over existing coaxial cable, Asymmetrical on EoC

 192Mbps @up to 900 meters (2,952 feet), reach down to 64Mbps @about 1.2Km (4000 feet) 

 Operates transparently to high layer protocols such as TCP/IP

 Auto-MDIX and auto-negotiation 10Base-T or 100Base-TX and Full or Half-Duplex on the Ethernet port

 Plug and Play design for simple installation, single switch configuration

 Status LEDs for simple monitoring of the device and connection status

 SQoS Priority Mapping Support 


功能简介 技术参数 连接示意图 资料下载

Applications:

 Extend LAN connectivity to a remote site or between buildings 

 Connect Ethernet to different Room over existing home Coaxial infrastructure

 Connect new controller technology on the factory floor using existing wiring

 Extend Ethernet connectivity from a backbone network to an isolated location via Coaxial cable

 Transmit Video and traffic controller information over existing Coaxial cable

Specification:

 Network Standards

IEEE802.3 10BASE-T, 10Mbit/s

IEEE802.3u 100BASE-TX, Fast Ethernet at 100Mbit/s, Auto-negotiation

IEEE802.3x Full Duplex and Flow Control

 Connectors

Fast Ethernet :Two RJ-45 Connectors

Coax :Two F-Type Female Coax Connectors, One for EoCk, the other for CATV

 Transmission Power and Spectrum

14 +/- 0.5 dBm

12-28 MHZ

 Transmission Speed and Distance

Up to 192Mbps@900 meters

Up to 4000 Feet (-176dBm/Hz Noise Floor)

 Fast Ethernet Interface

10/100 Mbps  (10/100/1000Mbps for EOC-0102M-E)

MDI/MDI-X Auto Crossover

 Indicators

“Power” LED

LAN Link/Act LED, STB Link/Act LED

Coax Link/Act, SyncMode LED

 Environmental Conditions

Operating Temperature :0°C ~ 55°C (32°F ~ 131°F)

Storage Temperature :-10°C ~ 65°C (14°F ~ 149°F)

Operating Humidity :10% ~ 90%,Non-condensing

 Power Requirement

External Power Supply :12VDC

Power Consumption :< 5 Watts

 Physical Dimension

155mm(W) x 83mm(D) x 30mm(H)

 Unit Weight

330 g

Emissions Compliance

FCC part 15 Class B, CE Mark



table 1

Application Name:

EOC access on coax cables

HW Configuration:

Coax

Physical Interface:

Coax

Transmission Power [dBm]

14 +/- 0.5dbm

Dynamic Range [dB]:

(see Table 2)

Collision detection:

Disabled

MAC mode:

Synchronous

Transmission Mask Type:

Flat

CATV to EoC Insertion Loss[Master]:

0.5 dB +- 0.5dB

EoC to TV Insertion Loss[CPE]:

0.5 dB +- 0.5dB

table 2



EOC application (RG59)

Path attenuation [dB] Line Rate [Mb/s]

0-6

NA

7-51

224

52-55

192

56-59

160

60-62

128

63-74

64

>75

No connectivity




· Front panel info:

图片1.png 


· Rear panel info:

图片2.png

 



EOC HFC plus EOC Network:

图片3.png



Ethernet access over Coax installation:

图片6.png



Basic connection:

图片4.png